ANNOUCEMENTS


announcement_title

December 2019

AEG has secured a new order to design and manufacture 150,000 pieces of Brass Ball Valve

AEG has secured a new order to design and manufacture 200,000 pieces of Brass Tail Piece..

AEG has secured a new order to design and manufacture 750 sets of Mushroom Packers.

AEG has secured a new project to supply and install Power Meters.

November 2019

AEG has secured a new project for Supply and Installation of 1200m of Concertina Wires at Height

AEG has secured a new order for the supply of 40 units of ATC Fan..

AEG has secured the latest order for Batch 6 of 2 shipset of Manual Valves.

AEG has secured a new order for the Supply of 177 units of Traffic Wands.

AEG has secured a new order for the Service and Maintenance of Special Purpose Clamping Tool..

October 2019

AEG has secured a new order for two (2) units of AC Generator..

AEG has secured four (4) new orders for the Replacement of Shutter Motors and Push Buttons.

AEG has secured two (2) new orders for Traffic Cones and Blinker Lights.

AEG has secured a new project for the fabrication of four (units) of Cable Reel Stand.

September 2019

AEG has secured a new project for Supply and Replacement of Gate Valves, Motorized Butterfly Valves and Flow Switches.

AEG has secured the latest order for Batch 5 of 2 shipset of Manual Valves.

AEG has updated all the latest range of Products and Services.

AEG has renewed Certifications in ISO9001-2015, ISO45001 and bizSAFE STAR till 2022.

AEG has renewed BCA Gradings for ME11(L1), ME05(L1), SY08(L3), SY09(L2) and CR01 till 2022.

August 2019

AEG has secured a new project for the Annual Preventive Maintenance of Generator Sets.

AEG has secured a new project for the Supply and Commissioning of Manual Valves Batch 4 with DNV.

AEG has secured a new project for the Supply of Thermostatic Valves.

AEG has secured a repeat order for the Supply of Aquatherm PPR Pipes.

AEG has secured a new order for RF PCB Board.

July 2019

AEG has secured a new project for the Preventive Maintenance and Rental of Generator Sets..

AEG has secured a new project for the Overhaul of Rotary Feeder

AEG has secured a new project for the design and fabrication of Sensor Brackets and Tank

AEG has secured a repeat order for the Supply of DAESAN Electric Chain Hoist Spare Parts

Jun 2019

AEG has secured a new order for Supply of Circlips and SS304 Rods.

AEG has secured a repeat order for the Fabrication of SS304 Steel Plates, Square Tubes and Anchor Bars.

AEG has secured a new order for the Supply of Gaskets and Snap Frames.

AEG has secured a new order for the Supply of Plastic Covers

May 2019

AEG has secured a new project for the Design, Installation and Commissioning of SS304 Low Slope Panels for 16 Stations.

AEG has secured a new project for the Design, Installation and Commissioning of Swing Gates.

AEG has secured a new project for the Design and Installation of SS304 Pipe Support Brackets for 16 Stations.

AEG has secured a new order for the Supply of DAESAN Electric Chain Hoist Spare Parts.

April 2019

AEG has secured a new order for Batch 3 Manual Valves for 2 Vessels.

AEG has secured a new order for the Fabrication of SS304 Steel Plates, Square Tubes and Anchor Bars.

AEG has secured a new project for the Fabrication of PCB with Ultrabright SMD LED Lights.

AEG has secured a new order for the Fabrication of PSD Indicator Cover.

March 2019

AEG has secured 2 new orders for PPR Pipes and Fittings.

AEG has secured a repeat order for Copper Shoe Plates

AEG has secured a new orders for the Fabrication of 2 units of PL200 Skids.

AEG has secured a new project for MR Dorma Door Rectification Works.

February 2019

AEG has secured a new order for the Servicing and Overhaul of Generator Set.

AEG has secured a new order for the Fabrication of 1000 pieces of Camera Plastic Covers.

AEG has secured 5 new orders for Minor Works and Repairs .

January 2019

AEG has secured a new Contract for the Replacement of 59 units of Motor Operators.

AEG has successfully completed a SDM Turnkey Project for Control Valves. Motors and Flow meters.

AEG has secured a 2nd Order for the Supply of Manual Valves for 2 Shipset Worth of Vessels.

December 2018

AEG has secured 2 new orders for the fabrication of Pump Shaft and Rotor with Mixed Blades respectively.

AEG has secured a new order for the Rental of Generator Set.

AEG has secured 2 new orders for Minor Works and Repairs

November 2018

AEG has secured a 3+2 year Term Contract from the Preventive and Corrective Maintenance of Roller Shutters.

AEG has secured a new SDM project for the Calibration of Flow Meters.

AEG has secured a new order for the fabrication of 1000 pieces of L/R Guide Bracket Support.

October 2018

AEG has secured a new SDM project for the Overhaul of Motors.

AEG has secured a new SDM project for the Servicing of Control Valves with Actuators..

AEG has secured 2 new orders for the Annual Servicing and Maintenance of Generator Sets.

AEG has secured 3 new orders for Minor Works and Repairs.

September 2018

AEG has secured a new 5-year contract for the Preventive Maintenance of Generator Sets.

AEG has secured a new order for Supply and Delivery of 100 Sets of Heavy Duty Barricades.

AEG has secured a new order for the Replacement of Ductile Iron Pipes.

August 2018

AEG has completed a Turnkey Project on the Design, Fabrication, Installation and Commissioning of Pump Skids.

certificate-4

July 2018

AEG has secured a new contract for the supply and delivery of 2 shipsets of Manual Valves.

AEG has secured a new order for cutting, polishing and chroming of 20 pieces of 5mm Rail.

AEG has secured a new order for the fabrication of 65 units of Rack Tray.

AEG has secured a new order for the fabrication of 1000 units of CAU Enclosure Box.

June 2018

AEG has secured a new order for the design, fabrication, installation and commissioning of 13 units of Skids, including Pumps, Motors, Valves, Strainers and Control Panels.

AEG has secured a new order for 2+1 Year Term Contract for the leasing of 5,000 square feet of warehouse space.

AEG has secured a new order for the design and installation of 4 sets of Bollards.

AEG has secured a repeat order for NH15 Masks.

May 2018

AEG has secured a new order for the design, fabrication and installation of Safety Railings and Ladders.

AEG has secured a repeat order for EPDM recoating of paper ticket dispenser roller.

AEG has secured a repeat order for the rental of 125 KVA and 270 KVA Generator Sets.

AEG has secured a new order for the Supply and Delivery of different types of I-beams.

April 2018

AEG has secured a repeat order for the preventive maintenance of Generators for 14 stations.

AEG has secured a new order for the supply and delivery of Pneumatic Fender Sets.

AEG has secured a new order for the fabrication of Eye Pads on 5 Units of Cylinder Stands.

March 2018

AEG has secured a new order for the supply, installation and commission of 60 units of Ritar Batteries.

AEG has secured a new order for the supply and delivery of Metrahit IM Xtra Gossen Metrawatt Multimeter.

AEG has secured a repeat order for NH15 Masks.

AEG has secured a new order for the supply and delivery of 6 units of 5″ High Pressure Gate Valves.

February 2018

AEG has secured a new order for the supply and installation of 3 sets of Generators.

AEG has secured a new order for fabrication of 44 sets of Radius Arm Support Rollers.

AEG has secured a new order for the supply and delivery of Manual Valves.

January 2018

AEG has secured 1-year Term Contract for the leasing of 40,000 square feet of warehouse space.

AEG has secured 6-month Term Contracts for the leasing of 6,500 square feet of warehouse space.

AEG has secured a new order for the supply and installation of 4 Pole Hoists.

AEG has secured repeat orders for the refurbishment of Rotary Feeder and rental of Generator Set.

AEG has secured a repeat order for Fire-Rated Partition Wall.

December 2017

AEG has secured a repeat order for 9 units of CSS1450H and 2 units of CSS1650H Rubber Cell Fenders.

AEG has secured a repeat order for 10 units of Drum Brakes.

AEG has secured a new order to refurbish 28 units of Jacketed Ball Valves.

AEG has secured a repeat order to refurbish 1 unit of Rotary Feeder.

November 2017

AEG has secured a new customized order to design and fabricate 6 units of Pump Skids.

AEG has secured a new order to supply and deliver 10 sets of Motors.

AEG has secured a new customized order to design and fabricate 18 units of Aluminium Stands.

AEG has secured a repeat order for 4 units of Fire Rated Partition Wall installation work.

October 2017

AEG has secured a 1+2 year Term Contract for Fire Rated Shutter Preventive Maintenance.
AEG has secured a 1-year Service Contract for Lifting Equipment.

AEG has secured a repeat order for 1 unit of Fire Rated Partition Wall installation work.

September 2017

AEG has secured a new tender for 125,000 pieces of Brass Ball Valve and 85,000 pieces of Brass Tail Piece.

AEG has secured a new project for the design, supply and installation of new railings at Singapore Zoo.

AEG has secured a repeat order for 1 lot of thermostatic valves.

AEG has secured a new order for 1 lot of traffic products and NH15 masks.

AEG has secured a repeat order for 2 units of Fire Rated Partition Wall installation works.

August 2017

AEG hosted Royal Oman Police Coast Guard (ROPCG) on Patrol Vessels.

AEG has secured a new project for supply, installation and commissioning of Seal Pot Cooling Water System.

AEG has secured a new project for replacement of valves and gaskets for Air Compressor and Dryer System.

AEG has secured a repeat order for 3 units of Fire Rated Partition Wall and 2 units Reinforced Concrete Wall installation works.

July 2017

AEG has secured a new project for the supply and installation of concertina wire at NEL Depot.
AEG has secured a new contract for Pallet Dolly.

AEG has secured a repeat order for the service and repair of Rotary Feeders, Hoists and Blower.

AEG has secured a new order for CISCO network module.

AEG has secured a repeat order for 5 units of Fire Rated Partition Wall installation works.

June 2017

AEG has secured a new order for the supply and installation of 1 set EOT Crane Inverter Main Hoist.

AEG has secured a contract for the trouble shooting and testing work on EOT Cranes.

AEG has secured a new order for the design, fabrication and installation of penstock.

AEG has secured a new order for the fabrication and installation of 1 lot of retractable trays.

AEG has secured a new order for the replacement of 2 sets of non-rising stem cast iron gate valves.

May 2017

Millenia Machines and Services (MMS), a subsidiary of AEG, turn Operational on 30 May 2017.
AEG has secured a new contract for the Visual Inspection and Load Test of Lifting Gears.

AEG has secured a new order for Rubber Fenders and Accessories.

AEG has secured a repeat order for 26 units of Cummins Diesel Engine Generator Set Preventive Maintenance.

AEG has secured a new order for first 5 units of Fire Rated Partition Wall installation works.

April 2017

Advanced Flow Systems (AFS), a subsidiary of AEG, turn Operational on 7 April 2017.

AEG has participated in SEA ASIA 2017 Exhibition from 25 to 27 April 2017 at Marina Bay Sands with CHINA EMPIRE.
AEG has secured a new order for Strainers.

AEG has secured 2 new orders for the machining of Plastics and Teflon Cams.

AEG has secured a new order for Track Circuit Bolt Sets – CEMBRE AR60D.

March 2017

AEG has launched a Strategic Partnership Initiative with one of her Key Customers.

AEG has secured a new order for 12 Sets of Pedestals.

AEG has secured 2 new orders for fabrication work on SS Bulk Truck Units and Mild Steel Baskets.

February 2017

AEG has secured a new order for 10T Electric Chain Hoist, 20T Motorized Trolleys and Festoon Cable System.

AEG has secured a new order for Roller Table.

AEG has secured 2 new minor work orders for the design, installation and certification of Safety Railings and CCTV.

January 2017

AEG is a proud recipient of the 30th Annual Singapore 1000 & SME 1000 Award. Organized by DP Information Group, key partners to this award includes ACRA, EY, IDA, SPRING, IE Singapore and Singapore Business Federation.

AEG has secured a repeat order for the Service and Overhaul of 40 sets of Traction Machines.

AEG has secured an order for pneumatic fenders.

December 2016

AEG has secured a new 3+2+1 term sub-contract for the Provision of Consultancy Services in Maintenance, Additions & Alterations and Repair and Redecoration.

AEG has secured a new contract for the Examination and Testing of Lifting Machines and Lifting Beams.

AEG has secured new orders for the Servicing and Repair for 2 X Generators and 3 X Blowers.

November 2016

AEG is a proud recipient of NS Mark (Gold), awarded by Dr. Mohamad Maliki Bin Osman, Chairman ACCORD and Senior Minister of State, Ministry of Defence and Ministry of Foreign Affairs.

AEG has secured a SDM Project for the Service and Overhaul of Motors

AEG has secured a new 2-year contract for the Supply and Delivery of Single and 2-Tier Cabinets.

October 2016

AEG has secured 2 new Orders for Generator Sets from existing clients.

AEG has secured a repeat order for the Service and Overhaul of 21 Generator Sets.

September 2016

AEG has renewed the ISO/OHSAS/bizSAFE qualifications.

AEG has renewed and upgraded BCA Work heads and Supply Heads.

August 2016

AEG has received NS Advocate Award (SMEs) during Total Defence Awards 2016.

AEG has successfully secured an order for 60,000 pieces of Brass Tail Piece.

July, 2016

Advanced Engineering Group (International) Pte Ltd received “SINGAPORE TOP BUSINESS ACHIEVER 2015/2016” and “TOP 20 Special Achievement Award 2015/2016” in the Engineering Category.


AEG has successfully delivered 3 contracts of Electrical Insulating Mats.

AEG has successfully delivered 3 full set of traffic products and accessories, including Barricades, Queue Stands, Traffic Cones and Retractable Barricades.

Jun, 2016

AEG celebrates its 3rd successful Anniversary.

May, 2016

AEG enters into 2-year Strategic Agency Agreement with ALIRAN LUAS SDN BHD, SPARKS INSTRUMENT SDN BHD and EXCEL MARINE PTE LTD to promote and expand AEG sale and services in the territories of Malaysia and Singapore.

Apr, 2016

AEG renews 3-year Exclusive Agency Distributorship with DAESAN INOTEC, CIMC DONGYUE, ZHAOYUAN TALENT and CHINA EMPIRE till 30 April 2019.

AEG secures 2 new repeat order for the Service and Overhaul of 40 sets Traction Machines.

Mar, 2016

AEG has successfully completed exhibition for Asia Pacific Maritime (APM) 2016 at Marina Bay Sands from 16 to 18 March 2016. We look forward to APM 2018!

announcement_title

Feb, 2016

AEG has successfully delivered a Ship Set of Marine Valves for H389 Vessel.

Jan, 2016

AEG has successfully delivered and commissioned a Ship Set Electric and Manual Chain Hoist System.

Dec, 2015

AEG has successfully commissioned 45 units of Cornerless Terminal Trailers.

Nov, 2015

AEG has successfully commissioned a 350T Stern Roller for H390 Vessel.

AEG has successfully serviced and overhauled 26 sets of Cummins Generators.

Oct, 2015

Advanced Engineering Group (International) Pte Ltd is awarded “SINGAPORE TOP BUSINESS ACHIEVER 2015/2016”. We also achieved “TOP 20 Special Achievement Award 2015/2016” in the Engineering Category.

Sep, 2015

AEG has successfully serviced and overhauled 30 sets of traction machines.

Aug, 2015

Advanced Engineering Group (International) Pte Ltd has embarked on BizSafe Exemplary Journey.

July, 2015

AEG has successfully commissioned 85 units of Cornerless Terminal Trailers.

Jun, 2015

AEG has successfully delivered a ship-set of marine valves for H385 Vessel.

Apr, 2015

AEG has successfully commissioned 200T Stern Rollers for H383. H384 and H385 Vessels.

Feb, 2015

AEG has successfully delivered a tender for cell and cylindrical fenders.

Jan, 2015

AEG has successfully supplied, installed and commissioned Air Compressor at Ulu Pandan Depot.

Nov 11, 2014

AEG has been awarded Singapore Entrepreneur’s Award 2014/2015!

Nov 9, 2014

In FY2014, AEG has successfully secured sales, tenders and contracts of a total value of S$12.8 million.

Aug, 2013

Advanced Engineering Group (International) Pte Ltd has obtained bizSAFE Level STAR Standard for Risk Assessment and Risk Management.

July 19, 2013

Advanced Engineering Group (International) Pte Ltd has received Certificate of Approval for ISO 9001:2008 on Quality Management System.